SPA SURFACE:
Your spa tile is acid resistant and frost-proof. The Tile does not absorb germs or algae. Tile does not stain and is very easy to clean. Color does not fade or loose its luster. All grouts are epoxy based and are extremely durable. To remove scum line use soft nylon brush and small amounts of biodegradable soaps. Do not use abrasive brushes or chemicals.

MAINTENANCE:

A. Chemicals:
1) It is important to maintain a chlorine residual of 2 PPM in the spa. That residual can be provided by chlorine or bromine. 2) It is recommended to use Bromine or dichlor (granular) forms of chlorine. If bromine Tabs are used we suggest floating or inline dispenser. 3) Never use acid to lower Ph in the tile spa. 4) Never use trichlor chlorine (1" or 3") tablets in the Nespa spas. 5) Never place tablets in skimmer basket.

B. Draining The Spa:
1) It is recommended to drain the spa at least once every 6 months depending on bath load and water clarity. 2) The spa should be drained through valve exiting re-circulation pump in the spa equipment room or sump pump. 3) Note: Use caution to drain spa in the winter months or rainy season when water table is at its highest. It is possible for the spa to float due to hydraulic pressure from surrounding water table. We advise that you consult with your local spa specialist prior to draining the spa.

C. Spa Equipment:
1) Clean filter cartridge at least once every 6 months, or when needed; i.e., if water clarity does not improve after several days. 2) Keep area free and clear from leaves and debris build-up. 3) Keep area free and clear from flooding.

D. Spa Light:
1) Spa light has to be on GFCI circuit. It is controlled at spa side with ON/Off.

E. Tile Servicing:
1.) Contact manufacture when servicing tile or grout. @ (530) 534-9910